...250 Series includes Manual Reset and Permanent Reset with Tools You can try to follow the steps found HEREYou can also find some specific error message that you might have encountered on your
Question about Canon PIXMA Office Equipment & Supplies
steps to reset the printer: Turn the printer off with the Power button (if available). Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) . Unplug the printer's
Question about Canon PIXMA Office Equipment & Supplies
...Error Code 5B00" it means that the Printer Counter Protection is Full and it required a reset and Ink wastepad replacement, if you want your printer to work again. There are two ways to reset the ...
...steps.1. Press Stop/Reset button for 5 seconds.2. After five seconds release the button.3. Now your printer will start its process and it is ready to use... thanks after press stop/reset button for 5 ...
Turn on. Reset 3. If this does not work. Look inside close to where the paper comes out (from the front.) There is a little door that can be flipped up or down. Flip this door up. Repeat steps 1 and 2
...Steps: 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset ...
...steps to fix this, 1. Hold RESUME then press & hold POWER 2. Release RESUME, then press it twice, the light should go amber then green again. 3. you're now in service mode (you can release POWER ...
...steps to fix this, 1. Hold RESUME then press & hold POWER 2. Release RESUME, then press it twice, the light should go amber then green again. 3. you're now in service mode (you can release POWER ...
...steps to reset the printer: 1. Turn the printer off with the Power button (if available). 2. Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) . 3. Unplug the ...
Question about Canon PIXMA Office Equipment & Supplies
/ thumbs / testimonial are welcome! If doing a power reset won't help, you need to reset the hardware itself. You can follow the steps from this site, How to reset Canon mp470. It did work for me.
245 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
