Canon PIXMA IP5200 InkJet Photo Printer "solve color printed refilled" Questions

...color red) which was empty and the message continues. refilling the tank does not solve this problem, canon design this printer to have their ink tank replaced, so do not worry too much about the ink ...

My printer shows E and alarm, after I refill my colored cartridge. How will I solve this problem? It look like you need to reset counter on your print head, buy reseter on your local printer supplier ...

...solve that you have to keep in target is to find and buy cartridges for it without the counter chip inside..In this way you will be able to refill them and use.. I tell you all that not to disappoint ...

refilled the cartridge and they said the colored cartridge had blocked, and that I should buy a new one. Will that solve the problem? I think you will find that it is the ALARM light that is flashing,

solve the problem. Note : Be sure to install the ink tanks in the correct order indicated by the label on the Print Head Holder. The machine will not print if an ink tank is installed in the incorrect

...color does not flow in - Canon ip1000 Similar to the said problem, only green/magenta colors are getting printed. Black does not. Please help in solving. Use isoproply alcohol on the actual heads of ...

...color" button once and the test page will print). Don?t worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I ...

...color. WHen I ran the diagnostic (a few times) the yellow printed unevenly. What can I do i think your cartige yellow ink had finished or dried up what u can do is refill yellow ink or dip cartige ...

www.nifty-stuff.com/forum/viewtopic.php?pid=17815#p17815 with tips on how to clean the print head I solved the problem by purchasing canon cartridges not remanufactured and the problem was solved

...nozzles. The problem is there. if you were to replace the in cartridges as a set, you will have solved 80% of the problem The other 20% would be a bad logic board....no replacable parts for this ...