Canon PIXMA iP4200 InkJet Photo Printer "replace paper jam sensor" Questions

...behind the platen roller that gets bent or broken when you remove a jam, especially if you pull paper backwards to remove a jam. If you can't straighten it you need a shop to replace the sensor

paper jam help me plz every time i try to print or even turn on my printer it keeps comming up with this message..."paper output slot the paper is jammed. clear the paper and press [ok]." and ive ...

...check for foreign material or paper debris in the cassette or in the PF rear guide; - remove foreign material. If other solution fail, replace one off the following part - PF pick-up unit - Logic ...

...for any object or paper stuck inside, clean roller. Some error like this can be a problem on the feeder sensor and by this time you may need to replace and repair the unit. Hope this initial info ...

...replace and repair the unit. Hope this initial info helps if you find a piece of a paper jammed, remove it by holding it with both hands , there may be a small tear of a paper inside but u cannot see ...

...Paper Jam-I checked the feeder and everything I know but it still comes up paper jam. Need help,Donna Hello and Welcome I am Angel Bird and i will be assisting you regarding the issue If you are ...

...paper left in my Canon Pixma printer. Could the jam sensor have been damaged and if so how much is cost to replace? Hello, I will advice you Press and hold the "Resume" button on the printer. Press ...

...paper jam. I got the paper out but now error message 6A00 appears in the screen. I have tried to turn off and on. Hi, The error code means paper path jam. Inside your printer a paper path sensor has ...

...paper jams will cease. If you plan to keep your printer, Replace the pick-up and feed rollers. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and ...

paper sensor is skipped.The paper sensor is under the scanner in the middle of printer.If the sensor id broken you need to replace,if the sensor is skipped try to put in the rigth position.Good luck!!