...change order.) The last time you loaded paper it may have pushed it just enough so that it is no longer seen as letter by the auto sensing board. I hope this helps... I use the front door MP Feeder ...
Question about Canon PIXMA Office Equipment & Supplies
...of printer), to Tray 1 (manual feed which you have to pull out the feeder for). Once going into the Printer settings and changing this, there has not been another issue. Try this and see if it
...feeder, it sends the document to the number you entered. TIP: If the recipient reports issues with the quality of the fax you sent, you can try changing the resolution or contrast of your fax. for ...
...manual says you can't interchange trays, and although I had them all out and they could have been mixed up, I don't think this is the problem. Tried rotating and that didn't help. From the printer ...
...change the main motor drive if it fails to initialize this is the error that will show up and there is no other way to reset it Open the printer paper tray (tray 1), and remove any jammed media you ...
Question about Canon PIXMA Office Equipment & Supplies
change this each time you print if you intend to keep printing from that "tray." The rear feeder can only take one piece at a time. I have had success with 67 lb. stock but not 110 lb. paper. Feed the
...manual feed. You can change this in the paper handling menu within the menu options set the tray 1 media type to plain and auto continue also correct paper size. You can also put the paper back into ...
manual to look up the printer error code. micro~ Check MP Feeder Paper is jammed in the multipurpose feeder.Remove jammed media. u have to change the roller of the printer your priter roller is bed so
Question about IBM Office Equipment & Supplies
...manual paper" instead of "multipurpose feeder" but then I have to hit the "go" button after each copy (which is tedious after 20 copies. Again, this is something that only recently started happening. ...
Question about Canon PIXMA Office Equipment & Supplies
manual feeder with custom type 1 letter. were as before it would automatically pull the paper from tray 1 or 2. What has changed? and can i fix it? in the printer properties during printing change the
649 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions