...three fins inside of dryer melted the three fins inside of dryer one is completely melted Did this occur from one dry session to the next? What articles were being dried when this happened. Depending ...
Question about Maytag Dryers
three paddles inside the dryer is coming loose. I want to fix this myself, but need to know how to get to those screws, please. You will need to take the back panel off use a 1/4 in socket driver.Then
Question about Maytag Dryers
...inside neptune md55 dryer came loose need to remove side pane The fin on the Neptune Dryer has come loose and I need to remove the side panel on the dryer to replace the two screws that hold one of ...
...three screws, then remove fan housing from motor. • Remove spring clamps by pushing ends of them down and away from motor. Lift motor up from motor mount. Cage motor is the best blow out with ...
...three digits of the model number are "110." remove the lint filter from the top and remove the two exposed screws. Then you can insert a putty knife or similar tool into the gap between the front ...
...three fins and then the next and so on. I also had luck using a small pair of needle nose pliers and grabing a small lip inside the area where the screw was and pulling from there.8. Remove the 6 ...
...three fins came loose inside the dryer and one of them is now lost. Who can I contact to purchase a new one with the installation screws??? The fins are called "Baffles" and you can find the parts at ...
...three internal fins in the dryer came loose and detached from the inside of the dryer. Now the dryer is losing heat where the installation holes are located. Can I purchase new fins and install them ...
58 questions posted
Usually answered in minutes!
1,743 Questions
867 Questions
815 Questions
489 Questions
196 Questions