Igniter comes on and flame comes on. Igniter goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame ...
...goes out Dryer gas ignites runs for up to 5 minutes then flame goes out Relights then goes out again Over and over Model DLL2650BCLAD Serial HR302837H check the igniter to make sure it is glowing ...
...to ignite at all?If it doesn't try to ignite at all, replace the igniter with this part.If it ignites and goes out after a few seconds, replace the flame sensor with this
...ignites but goes out after 15 or 20 seconds Upon starting my Kenmore gas dryer the igniter glows and the gas ignites, but the gas goes out after 15 or 20 seconds - clothes don't dry. Hello gdurawa ...
Igniter comes on and flame comes on. Igniter goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame ...
...it turns off The igniter glows and the blower ignites. It gets hot. Sometimes it goes out right away sometimes it goes for a while then shuts off. Check for a clogged vent, or a stretched out
...ignites, then flame goes out, good air leaving vent, vent cleaned. Its a Roper If the gas ignites but does not stay on the gas valve secondary coil is at fault. Replacement kit includes both coils ...
...ignites then goes out in about 10 seconds then it will re-ignite in about 3-4 minuites burn for about 10 seconds then goes out. I have replaced the coils and igniter. the thermal fuses tests ok. ...
Whirlpool Cabrio 6600 gas dryer. Igniter comes on, gas comes on an stays on for 40 seconds then goes out. Igniter comes back on about 40 seconds later and gas comes back on. 40 seconds later, gas goes
141 questions posted
Usually answered in minutes!
1,743 Questions
867 Questions
815 Questions
489 Questions
196 Questions
