Maytag Neptune MDG9700A Gas Dryer "burner" Questions

Ad

My stove is a GE and everything works but the burners and oven. Everything worked the day before. Burner light works burners don't. Oven light works , oven don't heat up. Clock works. check your ...

Ad

Question about Kenmore Dryers

1 Answer

...I verified operation of the gas valve and the thermostat (p/n 3403140). After turning dryer on, burner kicks on properly but after 15 sec, the thermostat trips and the burner immediately turns

Ad

Question about Whirlpool Dryers

2 Answers

gas burner ignites upon start up.gets hot while running normal then burner shuts off.burner tries to come back on but you can only hear the gas solenoid buzzing and wont ignjte again.if you wait a few

...5-8 minutes i have a maytag dg7400 dryer and the flame(heat) shuts down after 5-8 minutes AFTER THE BURNER SHUTS DOWN THE 1ST TIME IT SHOULD COME BACK ON WITHIN 1 TO 3 MINUTES. WHEN THE BURNER TRIES ...

Question about Whirlpool Dryers

1 Answer

The gas burner will not light. I close the door, push in the start knob and the dryer starts tumbling, but the burner will not ignite. Thank you, Bob  hi bob , with the dryer on switch the unit ...

Whirlpool electric Mod rf114px5 front burner overheated. Replaced switch mod # rf114px5b3. Now burner is not heating up enough. What to do? If control has been replaced, possible that the overheating ...

Question about Kenmore Dryers

1 Answer

...make sure the gas supply valve is open and gas is going to the unit. Then determine if the burner is lighting at all... there is a small plastic plug in the lower left of the front panel. If ...

...it is the ignitor, how would you determine that? First clean all the dust and lint from around the burner and its components, including the sensor which 'tells' the dryer that the ignitor is on or ...

GE DBL333GB Gas Dryer burner comes on one time only The burner only comes on first time . If the dryer has not been used and is at room temp, the burner will come on the first time, heat to about 110 ...

I have a vanguard vp2200ip and every now and then when it kicks on the number 2 burner does not properly ignite. I can turn it to 1 burner and back to 2 burner and is fine. What is causing this ...

Not finding what you are looking for?
Maytag Neptune MDG9700A Gas Dryer Logo

141 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...