Maytag Neptune MDG6800 Gas Dryer "ignitor cut working" Questions

...ignitor will simply fail after a use or 2. Also check the gas line were it enters the dryer. Many have an auto shutoff which cuts the gas off if it detects a problem. Some models also cut power as ...

Neptune gas dryer 9700 - drum turns fine, ventilation clear, but..... intermittent heat. Ignitor glows orange, then fires gas for about 10 seconds before fire cuts out - then repeats same process ...

...cut off? Also I did not have the exhaust hooked up. It sounds like you didn't install the ignitor properly. Try re installing the ignitor, because it's opening the gas valve saying it's hot enough to ...

...aleady checked: 1. Open the small access door in front of the dryer and start the heat cycle. The ignitor must glow a bright orange so that it is hot enough to light the gas. If there is no orange ...

...ignitor stay lit up? Already have changed the coils and thermostat and the cut- off The fuse (white skinny thang next to the control stat on the blower housing) shuts off power going to the gas ...

...cut off kit. I also gave it a thorough cleaning. It has a long flexible duct,but nothing is blocking it. Still, when i started I hear and feel it heat up, but after a minute it turns off and keeps ...

dryer will not heat up I replaced the ignitor and it still don't work You should check the thermal fuse or thermal cut-off

...cut off. So if the ignitor is doing its thing and the flame sensor is doing its thing then the coils which have been known to get hot and quit need to be replaced. Here is my home video: You-Tube ...

...cut off the ignitor , the coils should open to let the gas thru . Your dryer has a little peep hole you can remove to see the operation of the gas valve . Also , check the thermal fuse again ( or put ...

oven will not heat up in bake mode . smells of gas and no leaks i would replace you bake ignitor or broil check to see which one doesnt work. depending on which brand the maufacture wants u to buy ...