Maytag Atlantis MDE7400AY Electric Dryer "pull knob hard" Questions

Ad

Question about Kenmore Dryers

3 Answers

...knob (pull.). 6) Remove 2 screws and lift timer out. 7) Re-assemble in reverse order. Timers do turn slowly. If the dryer runs, and never quits, then the timer is probably bad. But if the dryer runs ...

Ad

how do you remove a timer knob on a maytag atlantis electric dryer Hi, Just pull it straight out towards you... I will come very hard... heatman101

Ad

...knob as instructed. have to pull so hard i finally pulled the knob off. what is the technical name for the part(s) i need to repair this? and how do i get it? I would go to sears parts online for an ...

Question about Dryers

1 Answer

new dryer looks like never been used (got in purchase of home), pulled lint trap to see for lint (clean) flashed light inside trap (clean), drum turns when on and clothes become warm/hot but not ...

Question about Whirlpool Dryers

1 Answer

...PULL THAT SAME KNOB SLIGHTLY, THE DRYER WILL TURN ON FOR A BRIEF SECOND, THEN WHEN I LET OFF THE PRESSURE ON THE TIMER KNOB, THE DRYER AGAIN STOPS. i TOOK THE TOP PANEL OFF AND LOKED FOR LOOSE WIRES, ...

...you pull the knob where the start switch is located within. Perhaps, more appropriate answer would be that the timer is the issue because the locking tab within isn't properly lockimg onto the

Question about Maytag Dryers

1 Answer

...knob off the timer and every since then, the dryer won't shut off on it's own and will continue running non-stop. Hi, That is not that hard to fix and you can easily buy the parts yourself online... ...

Question about Maytag Dryers

1 Answer

Pull knob to start dyrer will not work correctly.Have to pull hard and upwards,and sometimes this will not work. Have to fidget with it to get it to start.How do I replace this part and where do i ger

...knob in for the "on" position, you will hear an unusual noise almost like grinding. AND guess what, it was grinding, if if you look right under the bearing in the front of motor where the pulley is, ...

...pull the knob to start the dryer. It's been a pain so I just yanked it really hard and it broke off. Can it be replaced? Failure to start spinning is usually caused by the door (safety) switch not ...

Not finding what you are looking for?
Maytag Atlantis MDE7400AY Electric Dryer Logo

569 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...