Maytag Atlantis MDE7400AY Electric Dryer "cuts gets hot" Questions

Dryer runs for a few minutes then stops and all the lights blink when dryer motors start going bad, this is one sign that it is time to re-place motor. They come on and then cut off. Also, please ...

...gets Hot (glows)then cuts out after few seconds then if I wait for couple minutes and reset the clock to any set time the element glows hot again until inbuilt thermostats 'click' again cutting out ...

Dryer works but no hot air I have a Whirlpool LEW0050P and it no longer produces hot air. I have replaced the thermostat on the heating element but that didnt work. What should i do next? Hello, if it

want start when hot want start when hOT MODEL NO.PYE2200AYW SERIAL NO. 10446216WQ REVISION NO.10 The overheat thermostat is tripping and cutting power to the dryer (like it supposed to). The ...

dryer does not get very hot how do you fix that delicate cycle works fine normal cycle wont get get very hot it may be that your lint hose is plug up an making high heat switch to cut out

gets hot and then cuts off now it want even turn on I was wondering if it was the therma fuse, thermostat and the heat element that went wrong. E-mail address is mrcal32@hotmail.com Hi, The cycling or

it wont get hot. everything else works help please Could be the heater element or cut offs , you may need a multimeter to check then cut out/ stats should be short circuit and element read around 38 ...

...wrong? Sounds as if your motor is defective. It has an internal thermal switch which cuts the motor off before it gets too hot. After it cools, the switch makes up and the unit is able to run

dryer quit getting hot I could smell something burning then it quit getting hot,also it still runs with the door open. I would suggest that your thermostats/cut-outs have gone as a result of ...

dryer gets hot on top of dryer and cuts off Well all dryers get hop on top that is normal, the question is how hot, it is so hot it can't be touched for long or what?