Maytag Neptune MDE5500AY Electric Dryer "problems clothes ball" Questions

clothes "ball up", which takes longer to dry. Any suggestions would be greatly appreciated, we are ready to toss the dryer out the door. Thanks Robert/Sheryl hall P.S. We have tried those "dryer balls

...clothes are always wrinkled no matter what i do I have the same problem, but I found that shaking the clothing articles out while they are wet before putting them in the dryer, releases the wrinkles ...

...king size capacity. I've tried to do one set of sheets at a time, two sets at a time, one set of sheet and some extra clothes mixed in...always the same... a wrinkled up wet ball of sheets. what o ...

...clothes tumble, vent is clean. filter light flashing.Fuse was replaced along with thermostat. You were absolutely right about it being a venting issue. Although we thought we had it all cleaned out ...

Clothes roll into a ball on matag dryer Clothes roll into a ball in the dryer As you insert the clothing into the dryer make sure you open up the larger pieces fully so they do not ball up. Frequently

...your loads. If clothes don't freely they will have a tendency to ball up in that area. https://www.repairclinic.com/RepairHelp/Dryer-Repair-Help Posted a link to provide more advanced

...clothes above the door, spins them into a ball, and often causes holes. What could be the problem? YOUR DRYER DEFINITELY HAS A BEARING RUNOUT PROBLEM (THATS THE GRINDING NOISE YOU HEAR - THE DRUM ...

...just windex them sensing strips. If they can't sense wetness then the control will shut down quickly and the clothes will be wet. Lets see what else the crystal ball has...I have some manuals ...

...Clothes stay wet. Heats ok, tumbles, seems to vent to outside ok. Recently replaced fuse and thermostat. Did not fix problem. If the unit is heating properly which it should pull around 25 amps when ...

...ball and not drying,same for loads on clothes, they aren't drying.I recently replaced the exhaust line.Since then we have had this problem.Did I plug an air intake ? Sounds like out take, something ...