Maytag Neptune MDE5500AY Electric Dryer "motor loud hum running" Questions

...when it's working . Hi, The motor is going bad and this will make that loud humming when it is running... Dryer Repair - The Dryer is not Turning Dryer Repair - The dryer will not start ...

...loud I would suspect something is jammed and the motor is stopped leading to a heavy current running through the motor. After 5 or 10 minutes I would anticipate the circuit breaker would trip or the ...

...loud humming noise after running two loads. We then have to shut it off and let it cool down completely before running it again. the humming noise is most likely your motor. does it overheat or shut ...

...loud hum when running. It runs for 20 min and turns off. If you try to restart it just hums. if you wait about 30-45 min it will start again and run for another 20 min. can you help? It is possible ...

...going round and the dryer is just making a loud humming noise, please can you advise? Your belt probably broke or fell off the motor . The humming noise is the motor running without a belt on ...

...loud hum, but then quiets down after running a few minutes. Why? It's a whirlpool about 10 years old. Sounds like you may have a motor issue, they can get lint trapped inside, and it causes the motor ...

...louder and louder, and when its hot and you try to restart it it will make a loud hum as it tries to turn Check for correct voltage, if ok probabley start up capacitor on motor or the motor ...

...loud buzz when starting - if i hold the start button the motor will engage and the buzz stops. the dryer will run for about 5 min, then start making a loud humming noise like a bathroom vent and then ...

...loud hum at first and the motor either begins to turn or just hums. I did replace the drum belt this morning but that did not correct the problem. you need to either clean or replace the drive motor ...

...loud humming noise when it does run does anyone have any ideas? Sounds like the motor is going into thermal overload (Getting hot) it may be caused by the motor itself, or could be overloaded by ...