the computer starts..plus check the pwr connector and any other loose
connectors i.e the power on switch connector...and be sure that you have the index marking on the
ide-
connectors "flat cable" pointing to pin no:1 on your units...good luck
more...
you can check is to remove the harddisk and check the
IDE connectors and put it back it can be something loose. the other
more...
CD-RW not working on same
Ide cablew as HD Hi, I have recently installed a Gigabyte S one
Ide connection so had to get
ide cable with 2
connectors to connect Hard drive and cd-rw. I started the PC up
more...
Gigabyte S -series motherboard on my PC which only has one
Ide connection so had to get
ide cable with 2
connectors to connect Hard drive and cd-rw. I started the PC up
more...
You can slave the EIDE hard drive off of the CD Drive, as long has it of your CD Drive. That
IDE ribbon cable should have 2
connectors on it, one of them should be plugged into the CD
more...
or if you can't, then call the Geek Squad or someone considerably more qualified than I.
It may be true that the sledgehammer hard drive, and reocnnect the new one using the exact same
connectors.
There is a video on YouTube
http://www.youtube.com/watch?v=5lVnFlFrqhE
of a hard drive
more...
SATA 3.5" 2.5"
IDE 3 IN 1 TO USB 2.0 CABLE ADAPTOR KIT 1 external connector or SATA through a supplied adaptor. Supplied also are data
connectors to link the
IDE or SATA hard drive with a USB
more...
Sponsored Links