want to change from gas to power on maytag dryer i have a MDG5500AWW maytag dryer and I want to know if it can be converted to power no they cant
Question about Maytag Dryers
...power on my Maytag Neptune mdg5500aww the time or anything is lit up And I checked all the fuses and thermostats and they were all fine please help Unfortunately the problem you are having is caused ...
MDG5500AWW and have already replaced the mother board. The dryer began beeping periodically and then it just won't start - controls are frozen but they do light up. Checked the power, checked plug and
...power at the start in those two places, check the voltage at the motor, some of these units have a thermal protector on them as well, they look like little round discs with two leads coming out of ...
...MDG5500AWW Neptune Dryer. I have the front cover off and watch it consistently light once and burn for 5 minutes and then never. I watch the ignitor glow for about 20 seconds then it goes out and the ...
Question about Maytag Dryers
...MDG5500AWW (gas). Last week (No lights on panel, no power when you hit the start button). Had a serviceman out who said it was the control board, showed it to us and could see visible brown marks at ...
...MDG5500AWW say PF. I know this means power failure and I do not have any grounded outlets to plug it in to so I use adapters but still cannot get it to work. It acts likes it wants to start but then ...
...mdg5500aww gas dryer, i need to change the sensor, how do i get to it First of all shut off the power by pulling out the plug. If you are sure of the sensor issue then you need to remove four screws ...
Question about Dryers
...MDG5500AWW. The lights go on but dryer will not start and it smells like burning plastic or rubber. Maybe a wire. When it was reinstalled after painting wall behind it the gas valve was not opened to ...
1,026 questions posted
Usually answered in minutes!
1,743 Questions
815 Questions
489 Questions
196 Questions
146 Questions