Maytag Neptune MDG5500AW Gas Dryer "button pause start" Questions

...Pause" button has been pressed. To resume wash - press "Pause/Cancel" or "Start/Pause" once. If this does not prove to be successful please turn the breaker to the unit off for 5 minutes. Then turn ...

pause button may be stuck Kenmore Elite HE4 If the start button blinks and the dryer does not start, it's possible that the pause button may be stuck. Here are some steps to try and resolve the issue:

...button. * Wait 5 seconds. * Press and hold the Start and Pause/Cancel buttons simultaneously. * All LED’s will go blank and after a few seconds the control will signal the stored code using audible ...

...pause button. It alternates between this problem and another where the "Check Filter" light continuously flashes, and the dryer responds to neither the dial nor the start/pause button. I ...

...button down still says paused with a red sensor light flashing. FIXED - GFD85ESPN0RS GE Electric dryer flashing panel Appliance Blog https://www.applianceblog.com > ... > GE/Hotpoint Nov 17, 2020 - ...

...pause button to work sporadically? The start/pause button has been working intermittently for about 6 months. If I hold the button down for several minutes it might start. It most often takes several ...

START and Pause Cancel buttons simultaneously for 4 seconds. Rotate the cycle selector knob one click counterclockwise (2 o'clock position) and the error code will appear in the digital display as an

...pause button. I have check all the basics like dryer is clean & not overloaded. Any ideas? thanks Could be the door switch or temp sensor. To check the door switch put pressure against the door ...

button is pushed to start, sometimes pauses when button is pushed to start, most times will not start at all or runs for 10 minutes then wont restart Sounds like capacitor may be faulty - get engineer

...Why does it have "Pause" message and will not start? When I try to start the dryer "Pause" appears on the screen and the dryer will not start when I push the button possible bad control ...