paper. Do not use paper with bent edges or paper that will not lie flat. Make sure that the OUT tray is installed correctly. Make sure that the paper adjusters are not pushed up so tightly against the
not use paper that is bent, torn, dusty, damp, wrinkled, curled, or paper that does not lie flat.Use only one type of paper at a time. Do not mix different types, weights, or sizes of paper.Do not use
...not force the paper down into the printer when you load it. For example, A4 size paper should extend above the top of the paper support. (Letter size paper should align with the top of the paper ...
...paper is not used or damaged. ? If you are using specialty paper, you follow the instructions that came with it. ? You do not force paper into the printer. 2 Before loading paper, slide the paper ...
Question about IBM Office Equipment & Supplies
...paper. Do not use acidic or alkaline paper. â? Use long-grain paper. â? Use paper with a moisture content of approximately 5%. Caution Do not use ink jet paper. It may cause a ...
Question about IBM Office Equipment & Supplies
...paper is not loaded properly in the cassette ... Follow the below instructions to load the cassette and I am sure you will not get the error again. Grip the cassette handle, and pull it out towards ...
Question about IBM Office Equipment & Supplies
paper will not track evenly thruogh the printing process on my Epson Stylus color 740. It pulls through correctly on the left side but does not pull through, then crunches up and feeds through crooked
...not force the paper down into the printer when you load it. For example, if you are loading letter or A4 size paper, the top edge of the paper should extend above the top of the sheet feeder. The ...
...not, load paper into the IN tray and press the RESUME button. Do not load more than 100 sheets of 20-pound paper in the IN tray. The paper stack should not exceed 10 mm or .38 inches. Use the same ...
Question about IBM Office Equipment & Supplies
...not mix the paper you're feeding into the printer at one time. If you need to change the paper or size of paper being used removed any other paper currently in the printer before inserting the new ...
27 questions posted
Usually answered in minutes!
497 Questions
123 Questions
82 Questions
69 Questions
58 Questions