InFocus LP350 Multimedia Projector "test dlp bulb" Questions

...DLP 2400MP projectors. One stopped powering on even after using multiple power cables and outlets to test it. The other is the bulb going out constantly, I have replaced the bulb 3 times in the last ...

test equipment for DLP lamps.The only way to test the lamp is with a working projector.I am a Tech many times, I can tell by a visual inspection.If you purchased a cheap lamp, or from someone beside a

...test run plug in projector, the power comes on but no light? The red light sometimes flashes twice on the lamp indicator? can you enter the setting and check bulb life timer and if you can reset it? ...

...bulb but it continues to show these symptoms. It will be worthwhile to test the lamp on another unit or at a test center to confirm as the fault seems to represent a faulty lamp. If this is confirmed ...

test it. When I turn it on, the fans run, and the main light stays green. The bulb lights and then there's nothing. It's still lit, but the screen is entirely black and the lights on the control panel

...test. Thanks J Hi, try adjusting the color first then tint. Sometimes if it is in a smoky enviorment it can cause a yellowish circle in middle of picture if it is a LCD. If it is a DLP, then it could ...

...test the spare bulb I had previously, still got the "Lamp didn't strike". I thought "bad bulb after all". So I put the bulb InFocus had fixed the projector with back in, started the projector and ...

...not come on. How do I test the bulb to see if it is bad? you can just open the lamp and see the condition of the inner tube only. otherwise you have to replace the lamp and run it. Viren ...

...bulb is installed. This is a good point to test the iris movement at. You need to have some mechanical ability. If you don't think you can do this then don't. First remove the bottom bulb cover. Now ...

...dlp mp515 swithes on and goes off after few seconds, wht to do? test the power cord for loose wires or break use the multimeter 2) test the fuse loose or c.breaker loose wires 3) main switch for ...