Question about Eiki Office Equipment & Supplies
EIKI LC-XNB3 Projector - Does not recognize any Video Inputs My EIKI LC-XNB3 Projector does not recognize any Vdeo Inputs, but works great when hooked up to a laptop. I have tried all three ...
Video input not recognized Hi - can you help? When I connect my DVD player to the projector (RCA cord), the projector doesn't read the video input. The video input is set on automatic, and it worked ...
Question about Panasonic Office Equipment & Supplies
...recognizing any input over either of the two HDMI inputs. The JVC RX-D411S receiver was working fine up until I used the VGA input with a computer and since that time, HDMI has not worked (despite ...
Projector will not recognize my VCR I cannot get the projector to recognize my VCR. what inputs are you using? make sure video is selected on the projector and that it's running hd or not.
Comcast's 1080i signal is not recognized. I've confirmed the comcast box is set to 1080i but I get the error on my projector " Check input A signal" when ever I go to a HD (1080i) channel sounds like ...
Why is no input detected? If you are sending a video signal and the projector still doesn't recognize the input you can: * try a different input and see if that works * if it is an HDMI input, you ...
...recognizing any source Hi. My PH110 stopped to work: the vpr starts, the bulb lights on, the startup screen appears, but no input source is recognized. The vpr accepts menu commands, shows the OSD ...
Projector comes on, everything seems to work, wont recognize any inputs when they are plugged in, says that there is " no inputed detected" There are several input that you will have to select. RGB ...
no image My projector is hooked up to a docucam only. After being unplugged once it fails to recognize the signal. All power/cables were disconnected and reconnected. Still no signal. I read the ...
Question about Dell Office Equipment & Supplies
trying to synch my mac and my dell 3300 MP so i can deliver a power point. Your Mac should do it automatically. I suspect you need to get into projectors "input" menu an assign what input it's ...
84 questions posted
Usually answered in minutes!
400 Questions
218 Questions
72 Questions
80 Questions
76 Questions