InFocus IN72 Multimedia Projector "change resolution" Questions

...desktop on screen. How can I prevent this automatic change. when u connect to projector.after connecting change your laptop screen resolution and by setting lowest resolution you will see full

...reverts to 1920 x 1200. Any advice on a way forward? Native resolution of ypur projector is 800X600. Max. resolution is 1400X1050, but not over VGA. So, you can't change resolution to

should be the resolution of your PC as well. To change your resolution on your PC simply right click on your desktop and go to properties and then settings. You'll see the resolution bar in the middle

why do i have vertical lines on benq projector? Probably because the signal going into the projector is a different resolution to the panel. The projector has an auto sync feature. But that only helps

change to maximum resolution acer projector x1160pz When you connect a source to the projector, the unit will match the resolution input to it. As long as you don't exceed the max resolution, which is

...I have seen a vertical stripe similar to what you described Sorry, yes it worked! I did that. I changed the resolution to minimum 600x800 and it is fine. Great. many thanks! I have the`same issue ...

How do I fix an image being cutoff on the right side? There could be a few reasons that this is happening, you should try changing the resolution on your computer, some of these models have an optimal

projector starts, goes into search mode with a laptop plugged into it, but does not connect with the laptop. Has been working fine - this seems to be the only problem Used two different laptops to try

...change the projectors resolution. Is this resolution supported, and if so, is there a problem with the Auto sync circuit? The projector does not recognise a vista display res. Change the pc to the ...

...resolution properly. after you connect the laptop and the image shifts to the right, press auto adjust on the remote and the image will get OK. If not try resetting the projector settings to factory ...