Intel D915GUX Motherboard "change ide pin slave" Questions

IDE, primary OS is on SATA. How do I get BIOS to let me change sequence? check the the jumper pins on the back of the HHD, SATA should be set to master & IDE to slave read the top of the HHD first

...IDE cable, the other has to be set to master and the other to slave. See the small 6 pins next to the cable, there you should also see a small plastic jumper with a metal inside, you need to change ...

...change the pin on the IDE to a slave. Two open your bios. Asus board press the delete key every two sceonds untill the bios main menu opends. Go to BOOT section & make sure you have the SATA drive to ...

change the jumper from a slave to a master. Along with habib_101s solution, make sure it is on the end connector of the IDE cable, The middle connector is always the slave drive. Also if the IDE cable

...IDE Master (Change its jumper setting according to the drive?s label for Master with a slave) & connect the DVD player as a Secondary IDE Slave. (Change its jumper to slave). Change the Primary IDE ...

...change your first boot device to ......,press escape then press f10 to save to cmos to restart The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 ...

Change the pin on the 250GB IDE drive to Master with a slave. Take the 40GB drive & change it's pin so the 40GB drive is a slave. Connect the 250GB drive to the end of the IDE data cable & connect the

...IDE master port. You may need to reset the drive?s pin settings so it is seen as the primary drive. Than change the 3rd device in the bios boot priority list with the correct drive. Windows demands ...

...IDE slave port. (This is for testing only). Double check all power connections from the power supply to the motherboard. Leave the case opened. Look at the board when booted. Watch for the the case ...

...change using what, please can you also tell me errors to halt the boot process on can be chang by what?? Please i really need your assistance. a.       Click Start, type ...