Maytag MDB9600A Jetclean II Built-in Dishwasher "leaking float" Questions

Ad

Question about Kenmore Dishwashers

2 Answers

...leaking out the top of the shaft of the float. You must unlatch the float below the dw, very difficult, try a mirror, you also must remove the micro switch attached to the bottom of the float first. ...

Ad

...float and leaking around the shaft. Do not remove the float! I tried and broke the float trying to unscrew the nut. Fortunately, the new float was only a few dollars, but replacing the float did not ...

Ad

Roper Dishwasher leaks from float or float switch onto floor Roper dishwasher mod#WU0800X1 (apt size) leaks/drips onto floor from float or float switch. There are no other leaks and the float appears ...

Question about Whirlpool Dishwashers

1 Answer

...by myself,Is this a door adjustment or is there a float that may be malfuntioning? Hi, Check the float Here is a tip that I wrote about dishwashers and them leaking. Leaking Dishwasher ...

Question about Jenn-Air Dishwashers

1 Answer

...leaking water while cycling from the front, only on the sides. I think it is overfilling. Seals seem fine and have not leaked in the past. Float switch works. I have filled with lower water pressure. ...

Question about Dishwashers

1 Answer

Salt light on Ok this may be due to the float not staying in proper location due to small leak at the bottom of the door. If not the control panel board may need replaced. Check the float and for ...

Question about Kenmore Dishwashers

1 Answer

door is leaking water leaking bottom of door The first thing I would check is the overfill protection float. Check under the float for objects that may keep the protector from moving up or down.

Question about Electrolux Dishwashers

1 Answer

Not filling. I am experiencing similar problem to this post ( http://www.fixya.com/support/t5667965-not_filling ) and found the reply helpful. But can you tell me how to find the float switch? Thanks,

Question about Crosley Dishwashers

1 Answer

water won't come into the dishwasher The dishwasher will go through the wash cycles and gives all indications water is entering and leaving the machine, but the water does not enter the unit. The anti

...float to cause leaking problems ..as it is an overflow switch....also drying agents...that are used...especially if any is spilled inside will foam up and cause an overflow as well as liquid ...

Not finding what you are looking for?
Maytag MDB9600A Jetclean II Built-in Dishwasher Logo

214 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...