...door springs, pulley, and cables. The cable is usually attached to the door hinge--then goes around the pulley wheel and goes back to the spring system. Most noise comes from the hinge pivot point or ...
...door cable and pulley that how do I get to the door cable and pulley that squeaks when the door is open and shut? You need to pull out the dishwasher from under the counter and it runs along the ...
pulley is stationary, and creates friction/noise as the tight cord moves around it. Regular Vaseline applied to each cord, left and right sides of the door relieved the noise. Lots of luck Great video
Question about Dishwashers
...pulley type) is FINE...but door goes so far down bottom shelf nearly breaks dishes when pulling out granddaughter stood on GE profile dishwasher door and now it goes down too far when opening, making ...
...does not hold door up The doors have a combination of nylon cord and spring that works through a pulley system and could be the nylon cord or spring. You need to remove the side panel to repair
Question about Dishwashers
...pulley up to the door hinge again. Now the other end of the cable has to be hung into the door hinge on the notch further away from the door. There is some slack, but it is not quite ...
...door falls open, not just unlock but actually fall right open on most all dishwashers on the very bottom on each side is a pulley like system with two springs one for each side along with a small ...
why does my dishwasher door fall freely when opened? There are springs and pulleys that assist the door. They use a nylon rope that is very thin to connect the pulleys door and springs. The rope is ...
214 questions posted
Usually answered in minutes!
469 Questions
292 Questions
196 Questions
98 Questions
93 Questions