Question about Hobart Dishwashers
heating element. The float switch is working properly, so the element has not been left on with the tank empty. Every time it fails the center electrode gets distorted/bent first and eventually begins
...heating element. If water drips out from below the kick plate then you know the water is not suppose to go that high. Let?s say the unit is indeed under filling. Check for a deformed shaft on the ...
heating element clamp was bent up blocking the rotary sprayer. I bent it back down and the rotary sprayer can spin freely, but I don’t think any water is spraying up on the dishes. It heats and drains
...does not aerate) or water level inside appliance is not detected and than could be: Pressure controller faulty Pressure controller hose obstructed or bent Insulation fault with heating element ...
...heating element is normal Something leaking through the door...like the soap or rinse agent dispenser gasket, silverware basket button. Door hinge(s) bent Wrong soap was used...dish sink soap instead ...
...bent coat hanger. Also, any other ideas anyone has that I can check? Thanks! Hi, I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man ...
...heating element is normal Something leaking through the door...like the soap or rinse agent dispenser gasket, silverware basket button. Door hinge(s) bent Wrong soap was used...dish sink soap instead ...
...bent or kinked. If water is filling regularly, then the impeller pump may need to be checked, unplugging the hoses and looking for blockage in there. Hi Thanks for using FixYa. First of all please ...
Question about Dishwashers
...the display lights are on. I turned my circuit braker on & off and this did not help What could be causeing this problem? I know no other way the heating element could have ended up bent up like
76 questions posted
Usually answered in minutes!
469 Questions
292 Questions
196 Questions
168 Questions
98 Questions
