Kodak EasyShare Z612 Digital Camera "menu button not work" Questions

...Menu button. Highlight SETUP MENU, and then press the OK button. Highlight FORMAT, and then press the OK button. Highlight an option - MEMORY CARD (deletes everything on the card), CANCEL (exits ...

the button under the delete 3 times you should see the Flash status on the screen. What's your firmware version for the Camera. If you press menu the select setup menu, select about it should tell you

...button, menu button, trash button, zoom in and out button does not work. I was able to take one picture when I turned on the camera. After the first picture, no button work. I cannot take another ...

...menu button after switching the camera to the on position. My dad had the same problem and that's what worked for him. ok here is the fix. while you turn it own, hold down every button you have, for ...

...Fill Flash setup it means the Flash is defective call tech support toll free 1 800 235 6325 ext 12 You may also see the flash setting if you press the menu button and under menu button look for ...

button pressed while turning the camera on, then it will take 1 or 2 photos. I tried with different sets of batteries and with/without the SD memory card. I also formatted the memory. It does not have

...MENU button, use cursor-up/down to select Settings, press the OK button, use cursor-up/down to select "Format," and press OK. The DX7590 works with MMC and SD cards. It does not work with SDHC cards. ...

is not working camera kodak easycare c433 go to the menu and go to the settings/options and there should be a setting for plash or a button that has and arrow/lighting bolt figure and that should work

Menu button does not work Appears I'm not alone with this problem. How do I get the menu button to work? Thanks for your help. I had the same problem and fixed it! There is a small resistor just to ...

My camera is in smart mode and won't let me do anything, like change the mode or even get into menu, I can't review or trash. The buttons are not working/ cam not responding to buttons. Please do a ...