Lexmark X2330 Printer "put paper" Questions

...put paper in when there is already paper in it and it seems to be jamming everytime i put the paper in and try to print something. Why does the paper keep jamming even though i have put it in ...

paper and put it in the holder. The printer grabbed the entire stack of paper. Now I get a message to clear the paper jam. There is no paper jam, but the wheel that grabs paper seems stuck. Before you

...put more paper in, powered off and it stil says paper jam...opened it up and no paper i can see thats jammed.. Paper jams can be tricky to solve. The paper is usually stuck inside the printer ...

...put paper in to the printer you should gave them a good shake to lessen them up and put the paper some where it is worm, this is only because the paper is sticking to each other. All The Best ...

paper feed rollers to be sure they are clean and have no sticky areas. Be sure no to put too many pages in at a time. Try one page at at time first to test and see if all goes well then proceed to try

...put the paper in the printer it keeps leaning to the right i have an all in one i believe it has fax,printer,scan and copy i just recieved this from my niece and now am trying to set it up but i seem ...

...Are ou fanning the paper before you put it in and cloing the paper guides tightly against the end and the side of the paper? Also, I would look for a tiny jam that is obstructing the

...PUT THE BLANK PAPER AND PRESS PRINT, THE PAPER DOES NOT GO DOWN FULLY AND IT GETS STUCK. I DID TRY SHAKING IT AND PASSING A PIECE OF PAPER THROUGH AND UNDER AND NOTHING YET. ANY SUGGESTIONS It sounds ...

...OK, and are "Fanning" the paper before you put it in the tray? As these are common causes of jamming up. Also make sure nothing is still inside & no bits of tape are still stuck on somewhere

...put this part back? Hello, The plastic piece you are talking about it just prevents the paper from bending forward when is inserted in the printer. That plastic piece should not cause any paper jams ...