Lexmark Z615 InkJet Printer "print black cartridge" Questions

...print black. How does this work? Well what the printer will do is mix all three colors to make a light black. This will eat up your color cartridge faster but is useful when you are out of black ink ...

...print. Does the printer use ink from both cartridges to produce "black"?? Usually black is provided by the black cartridge only. You might be able to setup the printer through the control panel using ...

print. Took out new black cartridge, shut of printer, restarted computer, and still nothing. No printing. I checked the icon for printing and it says "document in queue", "owner pending" Just a moment

...6570 with similar problem. Who can help? same here... x1270 doesn't print black check nto see if all the tape on the cartridge is off check closer when you tear it off it leaves a bit on the ...

...print the black is full I'm not a computer geek at all, but I find the color cartridges always run out first. Try to change your printer settings so it will only print in black and white and so uses ...

...print black. Our lexmark Z705 printer only prints color. The black cartridge says is is full but and a test page showed it can print black, but I cannot print my documents or pics in black Clean your ...

...print. Black print doesn't print onto the paper. I have a lexmark z615 printer. Try to clean the print cartridge nozzles. On your computer, open the Lexmark Solution Center by going to the Start ...

...print in black ink My Lexmark Z715 printer sat in a closet for about a year and a half. Now that I've installed it on my PC, it goes through the motions of printing, but the paper was black. It had ...

print in black Try to clean the nozzles on the black cartridge using a damp paper towel. How to Clean the Print Cartridge Nozzles and Contacts Manually. Then try to print to see if problem is resolved

...print/just changed black cartridge just changed black cartridge (did not change color cartridge --never use it) now printer goes into printing mode, etc., sounds as if it is printing, but nothing ...