IP Communicator VPN. Cisco is being used with Workbooth CD. Error msg. "no compatible sound device". When tested through windows and not CD @ boot up, there were no issues. I think you're confused. IP
LINKSYS ROUTER CONFIGURE ROUTER FOR DVR NETWORKING You need to know the ip address of your dvr. It might have a factory set ip address or a dynamic ip address from the router. You can then use this ip
what is ip address http://en.wikipedia.org/wiki/IP_address every device on the internet has an need an ip address. 4 sets of 3 numbers raning fomr 1 - 255. Exsample 192.168.1.10. 192.168.1.0 is the ...
...The reason they may not communicate if 2wire LAN is connected to DAX WAN is both may have same IP address. If the router has similar IP on WAN and LAN, it will not communicate. For that changing ...
...My requirement is little different. I have fiberoptical media at both the end.(Optical Mpltiplexer). having Ethernet port working in bridge mode so no IP address is given to these ports. ...
...but can not communicate with it In order to access the access point you will have to set your pc's IP to static. Use 10.0.0.10 in your computer. Go to the properties of your network adapter select ...
...microsoft.com/en-us/windowsserver/2008/default.aspx Login to your Dlink router and set the WAN side ip address to "automatic IP address" or "Dynamic". After finishing the setting turn the power off ...
Question about Allied Telesyn Computers & Internet
...but I can't acces the router "site" for some reason so I can open ports, help :) ? What is the IP address of the router? Can you still ping that IP? Try a different computer to access the
What IP address should I use for my internal network? Some routers have it as 192.168.0.x and some have 192.168.1.x. I don't know what the difference is. Thanks! There's really no difference at all. ...
56 questions posted
Usually answered in minutes!
3,968 Questions
1,852 Questions
952 Questions
689 Questions
416 Questions