Maytag MER6772 Gemini Electric Kitchen Range "code 1" Questions

...1 error code on range I am getting a f-1 code on the range when you hit reset then it stays off for several hours but then will beep and display the f-1 again. no were can I find what the f-1 code is ...

...code F1-1, I have unpluged the range, however I am still getting the error code when I use the range. if it is the stove that is in the picture the fault codes are in the door under the oven door. ...

...1. I ordered a new upper sensor and replaced it but now it still reads the same codes. I tried to reset a few times by unpluging it but the code is still there, it did work for a short moment before ...

...code f1-1 and f3-1 appears on the panel when using the ovens ofcourse when it gets warm or hot the ovens stop working.thanks for help still i have the with oven heats up and stops working the codes ...

code 1 and code 7 Installed it for the first time and it keeps beeping and shows code 1 and code 7 We bought it 7 years ago and just now installing We frequently see this error due to a failure on the

1-4 Error Code what does the F 1-4 error code mean? f1 is usually bad oven control board. Look for a tech sheet on the back of the oven. This will tell what all of the codes mean and what to check for

...1 code on the My range model has a F-1 code on the control panel and it peeps what is the problem As oven probes age, they can sometimes generate error codes on kitchen ranges and render them ...

...code. 1. If door latched: 1. Disconnect power from unit. 2. Check wires and connectors from control to door switch, then from door switch to control. If no damage to wires and all connectors okay, ...

i have maytag range model mer6770acw it give me codes f1-1 and f3-1 after 10 to 15 minths of using the oven what is that codes means and what i should do before calling the service tech. thanks F1-1 :

...1-A code flashed. The F-1-A code went away but the F-9-3 code is still flashing. Anyone know what this is? Thanks! what kind of oven and model, run this on a computer, just put it in the browser, i ...