Maytag MER6769 Gemini Electric Kitchen Range "unlock door" Questions

door will unlock? I was advised to disconnect power for at least 60 seconds to clear the control board. I did this several times with no luck getting the door unlocked. However, a few hours later, the

oven door is locked how do I unlock the door oven door is locked how do I unlock the door You should be able to press the clear/off key for three two five seconds and it should unlock your door.

...unlock door", but the door is already unlocked. We had the oven on "self-clean" and were cleaning the oven. Now that we are finished, we cannot bake. Anytime you push the "bake" button, the panel ...

...door will unlock. Step 2 Stop the self-cleaning process by pressing and holding the "Stop/Clear" button for three seconds. The oven lock should disengage after three seconds. In some cases, a ...

...when you use the clean the door will latch then not unlock....these have micro switches that lock and unlock the door.....this is gonna be either one of the switches or the door latch assembly

...door won't unlock oven door on my elite kenmore range will not unlock. i have disconnected the power in hopes that it would re-set the system. instead, the oven doors remains locked and will not ...

...door to unlock It gets 900f in the oven. If you were to open that oven their would be some serious burns. The oven must cool down before the door will unlock. Heat causes the latch to lock down. Only ...

door won't unlock Oven door is locked, won't allow reset via clear/off, I unplugged, hoping to "reboot" but when I plugged it back in, same status. Time didn't help: I eft it "locked" overnight. Still

...door did not unlock after cleaning cycle. The cleaning cycle ended about 4 hours ago. Oven is cool but will not unlock. How do I unlock the oven? This is the first time I cleaned the lower oven. The ...

door to unlock, but happy that I did not have to replace the control board or Try this to get the oven door open. Turn off the power, take a coat hanger and bent at 90 degree angle about 2 inches long