Stove igniters stay on. The igniter goes off only when the cap is removed. This is happening with two burners at the same time. This sounds like a valve control problem! Do not leave this go. This can
Question about Stoves Kitchen Ranges
Newhome stoves 600 SIDO oven ignites but flame stays low Hi The oven burner ignites but the flame no longer increases to what it used to. As a result, the oven does not reach the required temperature.
...stove stays ice cold. Stovetop burners are fine but oven doesn't ignite at all. No gas smell, no glow, nothing. Is this an electric ignite on this unit? If so is that probably the problem? And if it ...
stove top burners work fine. the oven burner ignites and the glow bar igniter stays orange, but the oven never seems to preheat. the flame pulses on and off. does not matter what temp I set it at, the
stove top pilot light I have a GE XL44 and the stove top burners will not light automaticly. I have to put a external flame to the gas when turned on. It looks like there is some sort of ceramic heat ...
Question about Avanti Kitchen Ranges
...stays on as long as the knob is held down, but as soon as knob is turn or released, goes out. I had this same issue on this same model (which is how I happened upon this page). I'm still not exactly ...
Question about Maytag Kitchen Ranges
...igniter for the gas.It is correct at least in my stove that at the time you are turning on the flame that for a few seconds the stove generates a clicking sound which is actually arcing from a ...
stove. If your top burners are lighting then you have a good spark module. That means the oven control is not getting confirmation of ignition and has tried several times and finally locked out. If it
igniter may have become defective...if it is a standing pilot stove then you need to make sure pilot is lit...if it won't stay lit, then the thermocouple may be defective..either way, these components
...stove lights very slow with a low flame. Should the igniter stay on after it lights oven Yes the ignitor stays on even after the burner is lit. The ignitor is wired in series with the oven valve. It ...
66 questions posted
Usually answered in minutes!
465 Questions
236 Questions
105 Questions
81 Questions