Maytag MGR6772BDS Gemini Gas Kitchen Range "igniter clicking even burner" Questions

clicking cannot get one of the five burners to stop the electronic igniting even though the burner is on Hi, Here is a tip that I wrote that will help figure out why the burner spark keepson clicking.

all six burners continue to ignite ( click) even after being lit all six burners continue to ignite (click) even after being lit. The flame sensor is bad

...clicking. It clicks on all burners, even while the gas knobs are off. It clicks also while burner is on. What could be the problem. Could it be one of ignition switches or spark module. ...

...even though the burner is fully ignited. None of the other three burners are "clicking" but they will ignite if I turn them on. We finally got it to quit by cutting the circuit to the gas top range. ...

...for small cracks in white part of igniter. If cracked it must be replaced. With all knobs turned off top igniters still click must up plug for clicking to stop. plug back in and clicking comes ...

...clicking" even when the burner is lit.If every thing looks good, you may have a bad spark(http://www.applianceaid.com/images/surface-moduals.JPG) module, replace it. Sometimes cleaning can get ...

...clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged ...

clicking after is on Hello, Their are 2 possible reasons the igniters would continue to click after the burner is lit. 1) the burner is slightly dirty and the part of it very near the electrode is not

...even after back right ignites. Clicking will stop if right back burner turned off. Back middle burner works fine if used alone. back right burner is not reading flame clean electrode make sure it is ...