Question about Maytag Kitchen Ranges
....if not 220 volt reading problem will be with the house.if yes 220 volts will need to trace out the range .then the problem at a place the cook top burners and the oven have in common,wire path
oven light does. This factory service manual will help you. First,verify 220 volts to the range at the terminal block on the rear where the cord connects. http://servicematters.com/maytag_library/docs
Question about Kenmore Kitchen Ranges
gone bad. I don't know if you know how to use a volt meter but you can test to see if there is voltage at the element connections. Should be 220 volts. If you have voltage there you have a bad element
Question about Frigidaire Kitchen Ranges
oven works although control panel lights up first thing I would check is the voltage going to the unit. If the voltage is right at the plug, I would check where the power cord connects to the unit. If
...220 volts to the range where the cord connects. Second,unplug the range and remove the element again and using a volt/ohm meter set for ohms or continuity check the element. No reading is a bad ...
the oven did not work I am in Hong Kong but same as UK Hi, yes connect red to red, green to green, black to black, black is neutral, red is live and green is ground, which means you're using 220 volts
...oven works check your voltage. Is there 240 volts to the unit. Flip the breaker off and back on. If that doesn't work, with the unit unplugged, remove the cover where the stove cord is connected and ...
...oven The only thing that works is the clock. Flipped the breaker and nothing happened, still just the clock works. Do the electric ranges have fuses or is that just the gas ranges? check the ...
...volt, 60 Hertz power supply. If you are in some areas, you may not have the proper voltage available. 127 V found in states of Bahia, Paraná (including Curitiba), Rio de Janeiro, São Paulo ...
326 questions posted
Usually answered in minutes!
465 Questions
105 Questions
81 Questions
85 Questions