NEC Dterm DTP-2DT-1 Phone "cancel set flashing light" Questions

...set the"light setting",you can try to resetting or cancel this setting.Some phones will flash when they are under good signal. If you have any phone's questions,you may check the website,it may be an ...

...set and the FWD/DND button should light solid (or not, it's a program option) or flash.  If you dial 7101 it should turn on Do Not Disturb (7100 cancels).  In DND, the FWD light should ...

...set call forwarding up. To cancel call forwarding, with the handset down in the cradle press #11. On the keyphone that has the blinking speaker button: with handset on the phone, dial "#, 10, 1, #". ...

...cancel this setting do the following Lift the handset or press speaker Dial the access code 4 + 2 (set as default) Receive confirmation tone and restore handset or press speaker I have found the ...

...set to go off at 10:30??? sounds like your alarm or reminder on the handset has been activated to go off at this time every night, look up in the instructions for how to deactivate it. message with ...

...cancel/clear the flashing light? Hi, what has happened is someone has sent you a message internally, the only way to clear this on the prostar DCS is to set one of your programmable softkeys to be a ...

set on DND. in which case you have to Press feature dial the DND cancel code 69 press feature. If note look for you user guide here. http://www.neccare.com/cng/docs.nsf/Lib3?OpenView&Start=1&Count=100

...bottom line reads S&R PICK just press 3 and this should cancel it. Peter For me it worked by pressing speaker (or pick up hand set); dial 6,3; display will say "SEARCH CB ERASE"; select ERASE.

...Cancel is 0# in place of 4#, but you also have CF to voice mail issues, where 1+VM EXT is all calls and 2 is BUSY/NA. If you have a TD or TDA or TAW system, you get lucky, because the FWD/DND button ...

...set for Call Forwarding. To cancel from this phone, pick up the handset (or use speakerphone), then press this key sequence: [FWD/DND], [0], [#]. The light should turn off, and you should hear a ...