Maytag MEC5430BDS Electric Cooktop "not turn off" Questions

...still it keeps turning on. How to turn off please advise. Only one big coil is not turning off. It stays on while other coils are turned off Broken! Disconnect and call professional to fix or

...not turn off then that particular heating elemnt needs to be replaced.heat sensor is built in the elemnt.when elemnt is turned off and it cools down it makes a switch to open and inturn ind light ...

...not turn off! All the burners except one work fine. The main burner will not turn off. It is stuck on high. To get it to turn off I have to turn the breaker off. Does any one know what is wrong and ...

...not turn off CHECK Temperature Control Thermostat If the oven won't turn off the oven thermostat is often the cause of the problem. The electrical contacts inside the oven thermostat can weld ...

...not help, any suggestions regards chris It is child lock. Turn cooker on, press two + at front of oven, this will then take it off for that cooking session. To turn child lock off switch on hob, and ...

...not turn off, even though all burners are turned off. I also shut the power off but the light still stays on I can't help you with this if the light will not go off on one burner then replace that ...

...When I turned it back on to cook, only the inner burner keeps coming on instead of cooking with the whole burner. take knob off and check the middle is not split and hence not turning the ...

...not get it to turn back on. I talked to a service person on phone yesterday and he said to turn the power off to the cook top for 15 minutes and then turn back on. I did this and it is still locked. ...

...You might need to turn off the stove entirely. If there is even one function slightly on, the red light may not turn off. Try unplugging the stove if you can't figure out why its not off

...not turn off This is regarding Jenn-Air CVE3400 model radiant cook top with 4 heater elements and a downdraft. The controls are all on the right hand side. One of the heater elements would not turn ...