Question about NEC MultiSync Computers & Internet
...green power light blinking our NEC Multisync 75 monitor is not showing any picture. The green power light is blinking green so I know it is getting power but the screen is blank. Any idea what is ...
Question about NEC MultiSync Computers & Internet
...green power light flashes on when plugged in KDS k917s monitor won't turn on. The green power light flashes on once when it is first plugged in but after that, nothing. check the vga cable ...
...green light on the power supply is lit. Thanks. Look for bad caps with bulging top in the power supply first, post back what you see inside so we can guide you further, see example of failed monitors ...
Question about NEC MultiSync Computers & Internet
...light will glow green again, but the monitor will still be black, and the cycle will repeat The power supply section may be failed, or there may be a short on one of the boards causing the monitor to ...
Question about NEC MultiSync Computers & Internet
...green led will light & remain on but the screen remains black. On one of the monitors the screen will light up for a few seconds then goes blank. Powering off/on will cause the same symptons The ...
...green power light is flashing. If the system is booting up and if you see the "NUM LOCK" key lighting up in your keyboard then the system is working fine. The problem is with your graphic card. Check ...
i turn on computer few second stay picture then picture goes off and power light stay green. Exactly what the one in my shop is doing and it turned out to be bad HV board in monitor. Gary(Honkity Hank
...light is green when first turned on but turns orange after it shuts off. Your Secondary Power supply Hot TRansistor is Faulty, Its situated next to the lopt TRansformer to a Heatsink You have to ...
Question about NEC MultiSync Computers & Internet
...green light at all times unless I kill the power. I checked all the connections and it still does the same thing. If anyboday can help or tell me what the green blinking light code is it would be ...
...light stay green, but no picture. disconnect all the cables except the power cable and then turn the monitor on you would see a test screen if it still happens your monitor is faulty and better buy a ...
4 questions posted
Usually answered in minutes!
23 Questions
21 Questions
17 Questions
13 Questions
11 Questions