power light blinks and the status light is off, check the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have
...Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are different rates at which the status light will blink to indicate various errors. See manual ...
...power les is solid yellow and status led blinking by 1, 4, 8 and 12 second dont mention what means power led in solid yellow and status led in blinking red 6 second space. I need help in this... ...
Question about NEC Office Equipment & Supplies
...status indicator keeps blinking red. I tried pressing for more than 10 seconds the POWER and EXIT buttons on the remote as well, still no result. The lamp indicator is off, it's only the status ...
Question about NEC Office Equipment & Supplies
...and the projector not turn on. NEC-NP50 NEC NP50 will not power on. The status lite keeps blinking. What would cause this to happen. Could be a bad power supply, or lose connection try another ...
Question about NEC Office Equipment & Supplies
...replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then beeps about 3 times then turns to a flashing red. Help you need to reset the lamp ...
power & status light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this is an NEC VT 660 about 3 yrs old. the lamp
power -- status light still blinks seven times, I just can't get the projector to power up the bulb. the lamp timer is failing lamp timer chip is on the lamp housing,is a little chip you need to reset
5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 minutes. Then plug it back in. 95% of the time that will solve the blinking status light problem
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
19 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions
