...cable connector on the back of the modem while it is powered up and wait 15 seconds////then screw it back on (needs to be hand tight, its like a water hose, if its loose you get signal loss) and give ...
Question about D-Link Computers & Internet
...cable modem I have an issue with my Dlink DIR-625 wireless router. I cant get online. I am using a Motorola Surfboard Cable modem and i have Comcast as my provider. When i hook everything up the way ...
...modem light on router is blinking red and can not connect online. Computer will not pick up signal. Anywhere else i go I can conect. What do I need to do? My red light on my router is flashing and I ...
cable connection verify what computer can go online with your modem, once you know the main pc connect it to port one, access the routers setup page by typing 192.169.1.1 then locate MAC ADDRESS CLONE
modem to computer but still got this "unplugged" message. Also tried new NIC card, but made no difference. Sometimes lights on router are on long enough to make the online connection, but sometimes it
...cable of both your modem and router,leave it for 10 secs,then put the power cable only on to the modem and wait until all the lights are lit up,then put the power cable back to the router and check ...
...unplug the power to the router and to the cable modem. Wait for 30 seconds. Plug the modem first, wait for the lights to stop blinking then plug in the router. Check if the internet works fine
...at the rear side of your router for 2 mins if you have a cable modem and then check for connectivity. 5. If you have a dsl connection , then better contact customer care, they assit you very
2 questions posted
Usually answered in minutes!
1,980 Questions
758 Questions
457 Questions
324 Questions
292 Questions
