Maytag MSD2454G Side by Side Refrigerator "fridge motor hums door" Questions

motor, etc. turns off the noise will stop. We opened the panel on the bottom back of fridge and it will start and stop when that panel is pushed as well. We made sure nothing was hitting and vibrating

...motor is humming or grinding!! when i open the fridge doors the noise goes away? if there is no problem in the functioning of this fridge then the noise isn't a problem. but still i would advise you ...

...motor hums constantly. when you open either the fridge or freezer door, the humming stops but starts again as soon as you shut the door. Hi, Here is a tip that I wrote about refrigerators and the fan ...

fridge motor is loud when doors closed stops when open-3.5 yrs old- first time same problem fixed with replacing sensor 2/08 now sensor broken again??? I have an lg bottom freezer LRFC22750ST. This is

...Fridge performance is fine, working really well actually. Humming/whirring just driving me nuts. most likely it's coming from the evap fan motor or the ice maker,try shutting the ice maker off ...

fridge but won't dispense. I think it needs a new circuit board but want your opinion before I buy the board. thx If the little green lites show up , you do not need a circuit board . If you get a hum

...motor fan could also be causing the problem, so check the fan or make sure it's not dirty, frozen, or stuck on another object. This loud humming could also occur when the fridge door is open for an ...

...fridge felt warmer than usual. The motor wasn't shutting off -- kept humming. Then, I noticed a burning smell and felt intense heat from the light bulbs. So, my husband shut the power off and removed ...

fridge, now back panel freezing up, when door is closed. Not over loaded with food. Checked dial at 1. Light is on when door opens as usual. Motor humming too often. either a bad defrost terminator or

...fridge used to be super quiet. Now it's like it is always in his cycle. Thanks. Happens when the bearings in the fan or compressor motor are getting worn out. make sure there isn't a piece of ...