RCA HD52W59 HDTV Projection Television "tv channel logos screen" Questions

channel I have direct tv hooked into my ant/cable hookup and all I can get is menu screen and the logo unusable singnal on my L42D250. I tried channel search and I have 0 channels found. Except for my

...channel. It will not change channels at the TV or at the remote. First would be what kind of signal are you using?  Direct cable to the set or what?If only one channel does the number on screen ...

TV that is about 6 1/2 years old. It has been a very good set. However, about a year ago I noticed that it has "imprinted" a cable channel logo in the top corner along with a grid line image

...tv says weather channel in 1 corner and nickalodean in another. now im in search of a set of new screens its a easy fix if i can find someone to sell them 2 me I concur that the black bars will not ...

...CHANNEL 8, ENTER. 4) Wait until Initial Setup is displayed. 5) Turn off TV sets power by the Remote or Front Panel button. 6) WAIT AT LEAST 3 MINUTES UNTIL THE LAMP COOLS DOWNS BEFORE UNPLUGGING OR ...

TV logos from basic broadcast channels (ABC, NBC, etc) burned into the bottom right corner. Any help or insight you could give on these problems would be much appreciated. The tv have colors R,G.B mis

channel logo? Menu? If so, blue CRT or CRT board is at fault. Depends on the age of the set. If set is fairly new, then try to bang on the neck of blue tube with rubber screwdriver hands. Very gentle!

TV margins off screen. Anything I watch does not fit the screen properly. Often, the television channel logo in the corner of the screen is not completely visible, and video games do not fit on the ...

...channel logo is only half there and looks like if I only had another inch of screen I could see everything. There is a width problem. There could be a control inside to control this but the TV should ...

...TV finally comes on again! When I adjust the convergence for green center line, things are ok. I adjust the center + for red/blue just fine. When I have to adjust red/blue convergence on outer screen ...