RCA HD52W59 HDTV Projection Television "troubleshooting led tv signal" Questions

...led code blinks twice i have found two different explanations one is from the manual which says vertical protection, the other (from forum posts) says high beam current protection active. which is ...

...LED then turns off. It does this about three times. Sometimes the Transformer clicks and the TV turns on . Sometimes you can't hear the transformer click and the TV doesn't turn on . Seems ...

...led flashed is the last number of the error code. 12 ----------- indicates no error 21 ------------- X-Ray Protect circuit 22 ------------ Short Protect circuit 23 ------------- Horizontal Deflection ...

...troubleshooting charts at page 44 of user manual. (download the service manual here) Regarding the jungle chip, that is just a familiar name for the main computer CPU, service manuals rarely call it ...

...troubleshooting. told to replace the 4 caps that sometimes bulge. question is, is how do we find and replace the 'caps'? where are they located on the tv??? would be greatly appreciated, don't want ...

...LED lights on front of set.continu noise creates either in power section or flyback section need helps The most common problem is convergance amp ic, but with out troubleshooting it's hard to pin ...

...LED light on the power button keeps blinking or flashing. there is no picture or sound, but when i first turn it on it makes a clicking sound do you happen to know what might be wrong with my tv ...

...led flashing is indicating protection mode. That usually indicates an internal fault. Follow the full troubleshooting below: If an LCD TV has sound but no picture do the following: Use the source ...

...led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition. The flashing light indicates a diagnostic state called protection. When the TV goes on protection ...

...LED is an indication that the power supply has detected a fault, your mission is to determine what that might be. another thing to check out at the fuses on the power supply PCB (these have labels ...