black colure component, diretly soldered to a circuit board. In some sets, it will be on a seperate circuit board, and in some otheres it will be soldered to the front panel control switches board. OK
Question about Hitachi Televison & Video
...front that not what u wanted to be open.The back of the tv that what u wanted to be open.That where the tv convergence board is,that the board require reparing.Yes,if U have all the tools and can do ...
...circuit board locate the plug with wires that goes to the front of the set and its keyboard. Unplug it so the keyboard up front is out of the loop. The set will still be able to be operated with the ...
...TV stopped working. I cannot turn the TV on or off or use any of the other buttons such as volume, status. replace the front keyboard circuit board or it may just be the wire connection to that
...circuit board for the Hitachi 51F59A Projection TV. I have seen it called a ?Front Board 2002? and/or have a part number of 55010267. The part is no longer produced by the manufacturer. It was for an ...
...circuit problem The set may have a loss of sweep or even Glycol may have leaked from the picture tube above it onto the board in that area.Vertical circuit is on middle board at front right
circuit board. Can I remove and just use remote? if yes, where is it located and what does it look like. I am in Georgia when the menu keeps poping up it ussally the front panel cuircit board. This is
Question about Mitsubishi Televison & Video
...front will see 3 large circuit boards.The necks of the tubes are hanging down and the vertical circuit is on the middle board near the very front.Some models if you look up the neck of the tubes will ...
Question about Panasonic Televison & Video
The picture goes out if I tap the circuit board or the front of the TV it returns or if I just leave it on it's ok Loose solder contacts with circuit board. Contact any service technician. Electro ...
1,236 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: