RCA HD52W59 HDTV Projection Television "autoconvergence work tv" Questions

does it mean when the colors on a projection tv seem "kaliedescoped" ? looks kind of 3-D now... You need to run autoconvergence in the menu screen. If it doesn't work, you may have to clean the lenses

...colors not lining up together Try this with TV off Press and Hold CH- and Vol- at the same Time untill TV comes on then release ,Now you should be in factory settings,set should do AutoConvergence

...work when i try to play a dvd or ps2. the color is fine with the tv convergence is fine on your standard coaxal cable input. and you can autoconverge that. you may have to autoconvege on you digital ...

...Autoconvergence did not work; Unable to move the crosses in any direction when I tried to do it manually.Please help :) I love my TVJeanette Replace the convergence power supply. You can get the ...

...autoconvergence, when I get to the menu where that option is supposed to be, it's not there. Any thoughts on what the service mode for this tv is? replace FL231 400ma located in front of FBT.This is ...

autoconvergence When I have the TV auto converge...the test works showing red...green...blue. But when it starts to run after the red convergence goes thru sequence...green starts but stays in the top

convergence settings have to be close for the Autoconvergence to work. If they are not you need a technician to go into the service menu and adjust them.This is a long job and you can't do it yourself

...work. even buttons on tv itself are froze up. can only turn off tv by pulling power. First when replacing the small sig. board a full convergence must be done,the other trouble is most likely the ...

TV your convergence has gone out....there is possibley two ic chips that have failed. It might be some fuses but generally if they go the chips are the cause. on average a 300 dollar repair with parts

autoconvergence work.. in the customer menu under setup do you have the convergence option if you do not go to the tips and tricks section under my profile and read the article fl231 problem this is a