RCA DISH Network(r) 311 Satellite System "mean remote flashing tv" Questions

...tv remote codes Hi I have a Sony Tv model KV-28LS35U. What are the codes I require to input into Thomson Top Up TV remote to make it work TV - and how do I do it !! need sequence to tune in remote ...

remote to the sanyo tv. you need to press and hold the tv button that is on the upper portion of the remote, on the right side of the sat button. wait until all mode lights lit up, once all lights lit

...mean that you'd like your remote to be capable of controlling your tv.. then here are the instructions. Otherwise provide more information. 1.) Point the remote towards the desired device you'd like ...

...remote light up and release.The only button lit should be the clear tv button that will be flashing. 3. Press the small red tv button next to the power button and release it. This should leave the ...

tv on and noticed no power on digibox. I checked fuse - ok checked socket point - ok. Is there anything else I should check before buying a new one. Regards Maria the function light dose not represent

...remote to Sat from TV. The light on the unit brightens when I click. I also swapped out the batteries for new ones to no avail. The remote will change the channel on the TV. Do the buttons on the ...

...flashing light. Has anyone got any suggestions it is only about 10 months old. i had same prob, tried unplugging three times then unpluuged for 5mins , plugged back in left it alone, ie didnt touch ...

...flashing press the buttons up, down, left, right (these buttons are on the front of the box not the remote) this causes the hard drive to reset itself WARNING this will cause the box to completely ...

...mean? Hi! I will be glad to assist you. Let try to isolate the problem 1st. your channel keeps on changing by itself with out touching the buttons on the remote. Okay, please go to the front panel of ...

flashing 3 times, press the record button once, record button is under the cancel button or view tv button. once you press the record button , you will notice that the remote address for the secondary