RCA DISH Network(r) 311 Satellite System "direct tv receiver reading" Questions

...TV" The receiver powers up fine, but none of my remotes nor the front control is able to move the receiver past this screen. Receiv The remote will power the receiver up and down, but nothing else. I ...

...reading from the odd numbered transponders and 0's for the even transponders Recheck your dish direction and elevation you are probaly off just a hair andhd receivers have to be fine tuned. They ...

...reading over your post and ifthe 311 receiver is not getting any power please unplug it for 10 seconds.After plugging it back in within 3 to 5 minutes you should see the power comingon, if you have ...

...tv. I put it on channel 3,4,60,73 like the book says Hi donsol45my name is Mike Houston of DISH Network and I was reading over your post abouthooking up your DVD player to play. If you are using RCA ...

...only has 2 story apartments. All of the broadcasting antennas are located approximately 18.3 miles directly south of my apartment on South Mountain, with nothing in the way except for urban ...

...Direct TV as a replacement for a standard definition receiver. This latest receiver generates a tremendous amount of heat; so much so that it's almost too hot to place my hand on the top of the ...

How to tell if a diode is bad Use the diode setting on the DMM meter. The setting will look like an arrow with a line across it. It should read Low (about 550 ohms in one direction and High (or OL) if

Direct TV using a Sony Digital Satellite receiver model #SAT B2-2 /Sony Satellite dish purchased in 7/97. I get local channels thru Direct TV. Recently, local channels will show on the Direct TV guide

...reading over your post and see wherethe receiver will not stay powered on. Please unplug the receiver for 10 seconds andthen make sure the receiver is plugged directly into the wall. It will power ...