Ricoh A1515F Copier "sc542 fuser temperature warm error" Questions

...fuser) Hello - Overnight we usally power down and put our printer to sleep with a save energy mode. This morning while powering up the printer came up with an error code of sc542-00. At one point we ...

...SC542 Can't get the error code to go away. Can anyone help? Fuser temperature warm up error. Hot roller warm up error. It could need a new thermistor or a heat lamp. That will make the error go away. ...

...SC542 Error Code Means =( Fuser Temperature warm up error, HOT ROLLER WARM UP ERROR) Did you change the Thermofuse, if you did used a volt meter check for continuity accross the fuser lamp could be a ...

...SC542 542 Fusing temperature warm-up error (center) The fusing temperature rises less than 7 degrees in 2 seconds, and this continues 5 times consecutively. The fusing temperature is not detected in ...

SC542 is a Fuser error code. It's a "fusing temperature warm-up error", basically meaning that the hot roller in the fuser did not reach the proper operating temperature within an allotted time period

...sc542 any ideas how to fix Hi Thanks for using FixYa. This error mostly occurs due to power outage. This error means that the fuser temperature and hot roller temperatures have warm up. After ...

SC542 service code How can I clear this code? How do I get into service mode? I don't have any manuals for this machine. Brad Actually the code is for fuser. Here you go. To get in the service mode is

...sc542 service me to contact....... error code is: sc542Whenever i turn on my ricoh sp 203 sfn this code apear and ask SC 542 Fusing temperature warm up error.Fusing lamp defective,poor fusing unit ...

...fuser at 180,000 copies (service is at 120,000) DEAR SIR, We have got RICOH AFICIO 1022 Machine. error SC542 comes . Can any body suggest the solution ? Best Regards, S.Madhyasta u need to reset this ...

SC542 UPON POWER UP You have a Fuser Temperature warm-up error, Hot roller warm-up error. Verify the heater lamps, thermistor and thermofuse continuity. Enter in the SP mode, turn OFF the main switch,