Maytag 23 cu. ft. Side-by-Side Refrigerator MSD2356 "defrost bimetal" Questions

Ad

Question about Whirlpool Refrigerators

2 Answers

bimetal, timer failure or adaptive defrost, heating element failure, excessive air leaking into freezer compartment. Check by process of elimination. Best practice is to advance the timer into defrost

Ad

Question about Whirlpool Refrigerators

1 Answer

...defrost heater (with the bimetal closed). NOTE: The test mode will terminate when the bimetal opens. If the refrigerator/freezer is already in defrost, Test Mode can be terminated by unplugging the ...

Ad

Question about Whirlpool Refrigerators

1 Answer

...defrost heater (with the bimetal closed). NOTE: The test mode will terminate when the bimetal opens. If the refrigerator/freezer is already in defrost, Test Mode can be terminated by unplugging the ...

...first . Pt number 61006198 Heater and bimetal Pt number 61005988 Adaptive defrost board The bimetal , is the 1" cylinder , clipped to the top of the coils , and heater , at the bottom of the coils

Question about Whirlpool Refrigerators

1 Answer

...defrost heater (with the bimetal closed). NOTE: The test mode will terminate when the bimetal opens. If the refrigerator/freezer is already in defrost, Test Mode can be terminated by unplugging the ...

Question about Whirlpool Refrigerators

1 Answer

...defrost cycle are.1. Bimetal part# 43875032. Heater  part# 23155313. Defrost timer  Part# 482493The heater and the bimetal is located in the freezer dept. behind the back wall. The defrost ...

...". Accumalitive or continous . If set correctly , then the bimetal has to be the problem . Only 3 parts to defrost ....bimetal , heater,,,and timer . the defros on my Kemmore refrigerator does not ...

Question about Kenmore Refrigerators

1 Answer

...Hi. I reccommend you replace the defrost timer and bimetal thermostat. The bimetal thermostat is located on the evaporator coil. The bimetal thermostat is the most common failure. Good luck, ...

...defrost bimetal in the freezer. They are both cheap. If your refrig has a control board then you have to replace that instead, because that is what controls the defrost in an electronic defrost. ...

Question about KitchenAid Refrigerators

1 Answer

...bimetal twice and the defrost control board has been replaced once. The trouble still persists. I have checked the bimetal and the resistance is about 2 to 3 ohms when chilled. I can place the ...

Not finding what you are looking for?
Refrigerators Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Refrigerators Experts

vince

Level 3 Expert

2530 Answers

Johnny 1000

Level 2 Expert

94 Answers

Jesse Walters
Jesse Walters

Level 2 Expert

337 Answers

Are you a Maytag Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...