Question about Samsung Computers & Internet
...slave drive it is no longer a single drive. Simply choose master or master with slave. You need to configure the jumper at the back of the drive as shown in the following picture Configure the CD/DVD ...
...drive IDE-0 means Pri master IDE-1 means Pri slave IDE-2 means Sec master IDE-3 means Sec slave single or master ::::: master with slave ::':: slave :::': note the plastic jumper is ' ...
drive as a slave is fairly simple, but there are a couple of ways to do it. Little class first: IDE or integrated drive electronics is the entire system that controls the computers drives and how data
...this drive as a main drive put it in master if justa secondary drive put it in slave if ur ide cable ve one more room for one drive it will select automaticly slave or drive rate me as fix ...
...drive as slave on one IDE channel, with the other 2 CD drives on the other IDE channel, one set to master and one set to slave. So, pull the CD drives out and check the master/slave jumpers on the ...
...drive. On systems I build I set the top one to master and bottom one to slave. It makes it easier to hook up the cable to them. The end of the cable goes to the top one and the other one to the
Question about Samsung Computers & Internet
...slave On the back of the drive is a set of six pins. There will be writing above or below these pins it will be (cs),(sl)(ma). There should be a cap on two of these pins make sure you put them on the ...
drive should have "Slave". This is a slightly worse solution, as the optical drive will slow down the hard disk a bit, and also transferring files from one device to the other will be slower than in a
...drive to slave, it is always better to set the cd/dvd drive as slave change the other to master if not.Is the light on the drive constantly "on" i.e reading light. That means that the ribbon cable is ...
...drive a slave. Make sure the other drive is slave or master and appropriately change on this drive. IF HDD ( Hard disk) is master make this one slave or vice versa. Now windows should be able to find ...
95 questions posted
Usually answered in minutes!
736 Questions
430 Questions
332 Questions
330 Questions
306 Questions