...paper pickup roller? If YES - follow this simple steps: Open front coverRemove toner cartridgeLook for two plastic pins (left and right side of the roller) on top.You have to use flat screwdriver to ...
Question about Samsung ML Office Equipment & Supplies
...pickup rollers! Check the Paper feeds rollers just above the paper tray , if you do a lot of copying the feed rollers are FULL of paper dust. This is real easy to fix ,get a cloth rag apply some ...
...pickup rubber is in place. I does not, however, catch the paper. I viewed what was going on by leaving the front cover open and fooling the printer it to think it was closed by holding the lever down ...
Question about Samsung ML Office Equipment & Supplies
paper into the machine until the roller caught it. Which, in turn, often resulted in many explicatives directed towards said printer. All in all I like the Samsung ML-1430, which has been discontinued
...paper.html You need to rotate the rubber band on the feeder roll to a fresh surface. Start by turning off the printer, disconnecting it from power & data feed. Remove the two screws from the back ...
...paper pickup, press enter Suspect worn and or dirty paper pickup roller. To check the roller simply open top cover and remove toner cartridge. Roller is D shaped and can easily be removed by gently ...
...paper pickup press Hi I had a paper jam. when I removed the paper it says No Paper pickup press enter. When i press nothing happens. I have done every thing i can think of puting paper back in remove ...
...paper pickup, Press check 1. Push the paper far inside / use the priority tray. 2. Check for deterioration of the rubber on the main pickup roller (Replace if needed). 3. Ensure that the main paper ...
...Paper Pickup I am getting an error message on the HP 3390 printer stating "** Paper Pickup". The paper tray is full and it keeps doing this in the middle of longer print jobs. When i press "enter" it ...
...paper detect sensor arm and pull down on pickup roller assembly it should be springy not stiff. once it springs again, put paper detect sensor lever back on, on the right side of that lever gets ...
481 questions posted
Usually answered in minutes!
417 Questions
283 Questions
276 Questions
130 Questions
72 Questions