Samsung HL-R4266W 42" HDTV-Ready Projection Television "tv fan 3" Questions

...fan on my HL-S5086W DLP Samsung TV has become slightly louder than original operating sounds. I just recently replaced the lamp in the TV, which was relatively easy, and was wondering should I just ...

...seconds, then goes out. All three LED lights on the front of the TV flash when this happens. Any idea? Lamp Fan, make sure all fans are running if they run for alittle while and stop Fan is

...tv comes on then says fan 2 error . were is the fan 2 so i can try to clean it and will it work if i do ? Hello. You can't clean fan, it is dead or almost dead it have to be replaced for the new one. ...

fan' is a message that comes on when i power on my Samsung HL-S5679W DLP TV. There is no sound and you can get a picture to come on if you change sources for a bit but still no sound. Any ideas? Their

tv starts to make a large growling sound for about 5 secs. Then repeats every 15 sec. Sounds like if might be a fan. How many fans in this t.v. . Took the back cover off and I see 2. One is real small

...Fan No. 3"... It will stay turned on indefinetly, and I can watch TV without issue aside from the error message popping up every few minutes. Samsung has told me (of course) that I can't fix this ...

...off? Check the fans and make sure they are all working. The TV may be shutting off due to overheating if a fan quit working. If you think the lamp is still good maybe try replacing the lamp

...Second bad fan or fan contaminated with dust. Turn TV off unplug. LET cool down ... Using canned air clean all vents on rear of set. MAY also need to remove cover and find the 3 fans inside of

fan no. 3 appear when the tv is switch on, after a while the tv turn off by itself. I would like to see where the fan is located. one is located behind the DMD bord and One above the lamp blast One is

tv says check fan 2 A fan has failed--possibly is just dirty. I think there are 3 of them--2 near the lamp and one behind the DMD module. If not--check the fan connectors and make sure they are tight.