Samsung HL-R4266W 42" HDTV-Ready Projection Television "standby light blinking not power" Questions

...STANDBY, LED, TIMER LIGHTS ARE BLINKING. SAMSUNG DLP TV(HL-S5679WX)- STANDBY, LED AND TIMER LIGHTS ARE BLINKING, WILL NOT POWER ON. Check the capacitors on the power supply first. If any have domed ...

...standby temp light on continuously If I click the tv off and them back on w/remote it does show picture then after a few minutes goes black and standby/temp light goes on...the light does not blink. ...

...StandBy/Temp light comes on. The TV cycle through this sequence over and over. Checked the "CPU sized fan" and it is running. Held the lamp door microswitch too. The problem continues. Suggestions? ...

light blinks but picture does not come on. Unit shuts off after a little while. Unplugged TV for more than 8 hours and TV picture still wont come on. IF IT SHUTS DOWN TO STANDBY, THEN DIGITAL BAORD IS

? I'm not getting all 3 lights on the front blinking, but the red standby/temp light stays on? I tried unplugging for awhile, changing input connections.......is this a bad bulb? Yes, replace the lamp

...standby light flashing...nothing on screen and lamp not coming on? Its an hlp5063w. Please help.. Since you have replaced the lamp and wheel, next would be the ballast and power supply board. These ...

Standby/Temp, Timer, & Lamp lights will blink simultaneously and then it shuts down. We blew it all out to clean the dust, removed the back plate and blew that out too. Nothing seems to be working

...light blinks when tried, sometimes lamp lights up and sometime the standby one. I have it unplugged to try cleaning it first, I was reading how and then lost it, started telling me how to get to the ...

...power button is pressed, you can here it click, but after one second, it clicks off. Also, every once in a while there will be no click at all and the Standby and Temperature lights(the bottom two ...

standby, Power, and Lamp. If I unplug it it does the same thing no matter what outlet I use. I took the back off the TV and for that 10 sec the the TV comes on I can see the lamp lights up fine.....So